V-TEK TM-401, Руководство пользователя

Страница: 191 / 292

D292104.10a.fm Maintenance
Chapter 8: Maintenance 8- 3
Maintenance
Only maintenance personnel that have thoroughly read and understand the TM-401 User’s
Guide and have several years experience operating and maintaining similar machines should be
permitted to maintain the TM-401.
Routine Maintenance Schedule
The TM-401’s simple, low-maintenance design keeps required maintenance to a minimum. The
following schedule indicates common maintenance tasks and how frequently they should be per-
formed.
Caution!
Users should always wear protective eye wear when operating or maintaining the
TM-401.
Maintenance Task Schedule Materials needed
Vacuum or brush dust and
debris off machine, including
sensors Daily • soft bristled paint brush or
vacuum
Inspect nozzle tip for wear or
damage Daily • To replace worn nozzle tip,
call V-TEK Service for spe-
cific nozzle part number.
Check and set incoming air
pressure to 85 psi with the
vacuum on Every 120 hours of operation
or as needed. • None
Check & record vacuum lev-
els Every 40-80 hours of opera-
tion • None
Clean Heat Sealer shoes Every 120 hours of operation
or as needed • 3/32” hex wrench
• plastic or brass brush
• alcohol
Clean Loading Track Every 40 hours of operation • small, stiff bristled paint
brush
Clean Cover Tape Guide Every 40 hours of operation • alcohol
• cotton swabs
Inspect Air Pressure Regula-
tor for moisture build-up Every 40 hours of operation • none
Clean PSA Sealer assembly Every 40 hours of operation • alcohol
• cotton swabs
Replace nozzle vacuum filter Every 200-300 hours of oper-
ation • nozzle vacuum filter (p/n
201026)
Remove heat shoes, replace
if necessary Every 4 months • Heat Shoes (p/n 261122)