V-TEK TM-401, Руководство пользователя

Страница: 11 / 292

Operator Requirements D292104.2.fm vii
Operator Requirements
The guidelines provided in the following pages are intended to educate the user about how to
operate the TM-401 safely. They contain important information on avoiding potential hazards to
the operator and to the equipment. Only personnel who have thoroughly reviewed and under-
stand the
TM-401 User’s Guide and are aware of the possible hazards should operate or perform
maintenance on the TM-401.
Operators and maintenance personnel are advised not to wear loose fitting clothing or jewelry
when operating or maintaining the TM-401. Protective eye wear should be worn when loading,
operating or maintaining the TM-401.
Caution: Users should always wear protective eye wear when loading,
operating or maintaining the TM-401.
Safe operation of the TM-401 does not require gloves of any type, however some component
manufacturers may recommend gloves be worn when placing parts in tape. Consult the compo-
nent manufacturer for specific placement instructions. Ear protection is not necessary during nor-
mal operation.
When running the TM-401, the operator should stand or sit in front of the touch screen to assure
easy access to all controls and the
Power/Emergency Stop Button . This position allows the oper-
ator to view all parts of the TM-401 while it is in operation. When loading the TM-401 Manual
Tube Input Device (MTID or changing Taper reels, the operator may also need to access the side
and back of the machine
Caution!
The TM-401 should never be operated while under the influence of alcohol or drugs.
V-TEK® Incorporated takes no responsibility for the safety of TM-401 if it is used for
any purpose other than the intended purpose as specified in this User’s Guide.
Work Area