Figure 6-5 Connect Ground Cable
5 Product Introduction
The 48V 200Ah series batteries can applied to install in 19-inch rack / existing
cabinets.
The 48V 200Ah series batteries preferred to be installed in flat position as Fig
6-3 shown.
The battery must be fixed tightly with 4pcs M6*25 crown screws.
The grounding screw is M5*12.
In case of several battery parallel connection, it is advisable to leave a space of
at least 10mm between them.
NOTE
Figure 6-4 Connect Ground Cable
Pay attention to the polarity of the battery pack.
Connect the negative power cables of all battery packs first, and then connect the positive
power cables of the battery packs.
1 Connect Ground Cable
Take out the ground wires and connect one end to the ground point of the
battery pack and other end to the ground point of the cabinet.
6.5 Cable Connection