7 Power On
Please refer to the section 7.2 to get information of battery system parame-
ter setting, refer to the section 5.2.2 to get information of indicator description.
Figure 7-3 Page of UI Software
Connect the PC UI software to confirm the system running information been
displayed normally. If the displays normally, then we can know the battery is well and
the parameter settings are right.
7.1.4 Check by UI software
NOTE
Follow the power-on procedure to power on the battery pack strictly .
Make sure to turn on the charger/inverter firstly, before turning on the
battery MCB/Switch.
Must not change the parameters casually in the site.
After VT48200B series batteries goes into the sleeping status, please turn
on the Battery MCB/Switch against or press the reset button.
WARNING