Uwatec Z1, Руководство пользователя

Страница: 13 / 88

13
4. Things to Check Before Using the Z1
Before using your Z1, fi rst you’ll need to charge the unit and set the time and
date. Please fully charge and match the time and date display before use.
4-1. Check the Battery Power Level
The battery’s state of charge can be determined by checking whether [H],
[M] or [L] is displayed at the bottom-center of the screen.
Leaving the Z1 in bright light for charging may cause it to become quite hot.
Take care when handling the Z1 to avoid burn injury. The Z1 can become partic-
ularly hot when:
• Exposed for long periods of time on the dashboard of a car parked in direct
sunlight.
[H] or [M] displayed.
The Z1 is charged suffi ciently.
Set the current time. See "Confi guring
Current Time and Date settings.
[LOW] is blinking on the display.
[L] is blinking on the display.
[CHG] is blinking on the display.
Power is low.
Charge the Z1 by placing it in a location
where it is exposed to light.
CAUTION
4-2. Charging with Light (Solar Charge)
The Z1 is powered by a rechargeable battery that is charged with electricity
generated by the solar panel integrated within the dial.
When suffi
cient light hits the dial, the battery charges. When using your
Z1 on the surface, try to ensure that the dial (solar panel) is accessible to
light as much as possible.
4-3. How to Charge
When not wearing your Z1, leave it in a location that is exposed to light, either
outdoor sunlight or indoor fl uorescent or incandescent light. Once a month,
charging it in sunlight for half a day keeps your Z1 in a more stable condition.
When wearing your Z1, make sure its screen is not blocked from light by the
sleeve of your clothing. If the dial (containing the solar panel) is partially hid-
den, power generation effi
ciency will be reduced.