Uwatec Z1, Руководство пользователя

Страница: 39 / 88

39
8-5. Warnings in Dive Mode
Ascent Rate
The Z1 monitors your ascent speed and sounds
an alarm when your ascent rate exceeds
10m/33ft per minute.
• When your ascent exceeds 10m/33ft per
minute, a [SLO] warning appears in the
center of the main display which will blink
for 6 seconds. Also, an alarm will sound for
6 seconds.
• If, during an ascent, [SLO] warnings are triggered 2 times in a row,
these events will be recorded in your Z1’s dive log.
Decompression Dive
When the no-decompression limit (NDL) is
exceeded during a dive, visual and audible
warnings will alert you to make a decompres-
sion stop.
• DECO appears, the N
2
indicator blinks, and
an alarm sounds for 6 seconds, indicating
that you are now in a decompression dive.
• When you make your decompression stop at the indicated depth, DECO
turns off , the N
2
indicator changes from blinking to ON, and the dive
reverts to a no-decompression dive.
• The decompression dive event is then recorded in your Z1’s dive log.
1. Press-and-hold the ADJUST button to switch to Gas Change and
the current gas check display.
2. Wait until the screen returns to the DECO display.
3. Now you’ll be able to switch between Water Temp and 0
2
% by
pressing the ADJUST button.