Uwatec Z1, Руководство пользователя

Страница: 41 / 88

41
Out of Measurement Range
A warning is given in the following conditions.
1. When depth exceeds 99.9m/328ft.
2. When dive time exceeds 599 minutes.
3. When a decompression stop is needed at
33m/108ft or deeper during a decompression
dive.
4. When a decompression stop time exceeds
99 minutes or when the total ascent time
exceeds 99 minutes in a decompression dive.
• EEEE appears in the 7-segment display area, and an alarm sounds for
3 seconds.
• The Z1 cannot be used for diving for 48 hours after the warning is acti-
vated (except when dive time exceeds 599 minutes).
• All Out of Measurement Range events are automatically recorded in the
dive log.
O
2
Indicator and ppO
2
A warning is given when the oxygen accumu-
lated in the body exceeds the tolerance level,
or when the ppO
2
reaches 1.4 or more
NOTE: The higher risk event (closer to the limit) will be shown as an O
2
level
warning. The screen display at right shows a ppO
2
warning. When a ppO
2
warning occurs, the ppO
2
and O
2
bar graph (lower-right) blinks, and 'PO2'
blinks in the dot matrix box (upper right). When an O
2
tolerance warning
occurs, the ppO
2
and O
2
bar graph blinks, and the dot matrix box remains
blank.
• O
2
indicator and its ppO
2
indicator will blink.
• Alarm sounds for 6 seconds.
• The warning continues until the oxygen uptake inside the body or the
ppO
2
returns to the range of tolerance. When this warning alarm sounds
safely ascend to a shallower depth immediately.
• The warning is recorded in the Z1’s dive log.