Uwatec Z1, Руководство пользователя

Страница: 14 / 88

14
• Kept too close to heating elements such as powerful underwater lights or
incandescent lamps.
• Kept in any direct sunlight for long periods of time.
Allowing the Z1 to become too hot can cause its liquid crystal display (LCD) to
black out. The LCD should normalize once the Z1 returns to a lower temperature.
4-4. Insuffi cient Charge or out of Charge
You can get an idea of your Z1's power level by observing the battery power
indicator [H], [M], [L] at the bottom-center of the screen.
When the level of charge decreases, available functions become limited.
Consequently, always make sure your Z1 maintains a full charge by making
sure the dial is exposed to light as often as possible.
indication Charge state State of the Z1
H Good All functions enabled. [1]
M
Nearly good
(Charging
recommended)
All functions enabled. [2]
M
CHG blinks
low battery
warning
[CHG] blinks, rest of display shows OK, the Z1 can
be changed to Dive Mode for about 5 hours. After
that it cannot be changed to Dive mode unless
charge the Z1 to a point where the [CHG] is disap-
pear. Blue tooth connection cannot be used.
Other functions can be used as usual.[3]
LOW
or
L blinks
low battery
[LOW] and/or [L] blinks, digital compass, illumi-
nation and beeper (alarm etc.) disabled. The Z1
cannot be changed to Dive Mode. [4]
CHG blinks
(Other display
disabled)
low battery
Only [CHG] blinks and other display disappears, all
functions disabled.
[H][M][L] and [CHG] blinks together, a part of
functions enabled. (Current time display etc.) (5)
--- out of charge All functions disabled. [6]
1 2 3 4 5 6