Uwatec Z1, Руководство пользователя

Страница: 53 / 88

53
The Z1’s freedive log stores and displays information on your freediving
sessions.
1. Go to Log Mode.
In Watch Mode or Surface Mode, press-and-hold the LED/LOG button
for about 2 seconds. [LOG] appears on the screen, and the Z1 switches
to Log Mode after about 1 second.
2. Every time the LED/LOG button is pressed, it displays the newest free-
dive session in the newest order. Each time you press the PLAN button,
the oldest freedive session is displayed. Press-and-hold the LED/LOG
button or the PLAN button to fast-forward through all the freedive ses-
sions.
NOTE: The end of the freedive log (after the oldest log, and before the
newest log) is the freedive history data.
Ref: Display of freedive history • • • P.43
3. To display the freedive session you want to review when the freedive
profi le is on the screen, press the MODE button. [PROF] is displayed on
the screen and the profi le screen is displayed about 1 second later. It
displays the freedive profi le from start to fi nish with a 1-second sam-
pling rate. When you press anything other than the MODE button, the
automatic display stops.
4. Every time you press the PLAN button, the sampling interval data is
updated and the elapsed time advances. Every time you press the LED/
LOG button, the sampling interval data is updated and the elapsed time
is returned. Press-and-hold the PLAN button or LED/LOG button to
fast-forward.
5. Pressing the MODE button will display [LOG] and exit you from the free-
dive profi le display.
Start time Displays start time of dive
Log No.
Displays number of dives in the session,
from 1 to the total number of dives
(shown as =XX= )
Dive time Displays dive time min ’sec
Max depth Displays maximum depth of dive
Max Temp
Displays maximum temperature at
deepest depth
9-8. Checking the Freedive Log Profi le