Uwatec Aladin TEC 3H Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 79

background image

16

System and operation

WARNING

• If the bar graph shows 2 segments, the battery symbol will blink, on the surface and in dive

mode, to alert the diver of a dangerous situation: the battery may not have enough energy to
finish a dive.

• Replace the battery when the steady battery symbol appears (3 segments)!

F

The temperature influences the battery performance. In cold water it is lower than in

warm water. If the battery shows 4 segments on the surface, it is possible for it to
drop to 3 segments during the dive. If this is the case, the backlight will be tempo-
rarily disabled. See below.

Battery performance high enough for diving.

Battery warning appears. Backlight deactivated. Replace the battery! ->76

WARNING

Flashing battery warning. Audible alarms and attention
messages disabled! Backlight deactivated! Risk of computer
malfunction. Do not let the battery reach this condition!

Diving not possible, dive planner and settings are disabled

Bar graph
interpretation

Aladin TEC 3H marks dives started with 3 or less segments in the logbook with the battery symbol.
Logbook information is not lost even when the battery is removed for a long time.

2.12 Active backlight

The display of Aladin TEC 3H can be illuminated both on the surface and underwater.
The backlight can be activated by pushing

. The light will turn off according to the selection in

settings: Set 1 -> Light.
The backlight can only be activated if the computer display is on.

F

Repeated activation of the backlight will reduce battery life.

F

Keeping the backlight permanently on represents a severe strain on the battery. In warm

waters (20 °C/68 °F and above), a new battery can sustain 20-40 1-hour dives with the backlight
always on. In cold waters (4 °C/40 °F and below) the low battery warning may come on within the
first dive. For temperatures between 4 °C/40 °F and 20 °C/68 °F the life of a new battery will be
somewhere between 1 and 20 1-hour dives. Aladin TEC 3H monitors the battery level throughout
every dive, and if the available energy drops below the warning threshold, Aladin TEC 3H will
automatically disable the backlight to prevent a computer shut down.

«
...
14
15
16
17
18
...
»

Содержание Aladin TEC 3H
















































































Отзывы:

Нет отзывов

Похожие инструкции для Aladin TEC 3H

Бренд: Oceanic Страницы: 17

Бренд: Fender Страницы: 20

Бренд: Parkside Страницы: 94

Бренд: Kobold Страницы: 55

Бренд: Richie Kotzen Страницы: 12

Бренд: Feature tech Страницы: 2

Бренд: TA Instruments Страницы: 68

Бренд: Bühler technologies Страницы: 33

Бренд: YZXStudio Страницы: 3

Бренд: Barco Страницы: 33

Mini HD Recorder

Бренд: Green Feathers Страницы: 8

Бренд: Smartwares Страницы: 2

DUSTHUNTER SB30

Бренд: SICK Страницы: 72

Бренд: Saab Страницы: 116

Бренд: Kimo Страницы: 80

Бренд: pyroscience Страницы: 10

Бренд: Fluke Страницы: 14

Бренд: Autonics Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды