UTILEV UT25C Скачать руководство пользователя

Страница: 87 / 149

1. Danger Label:

WARNING:

You may be seriously or fatally injured if your body

is squeezed between the mast, the

is squeezed between the mast, the frame, and/or the overhead

frame, and/or the overhead

guard. If there is a need to

guard. If there is a need to inspect or maintain this part, DO NOT

inspect or maintain this part, DO NOT

perform the inspection or maintenance until after the engine has

perform the inspection or maintenance until after the engine has
been turned off and t

been turned off and the mast and carriage appropriately secured.

he mast and carriage appropriately secured.

This forklift cannot carry passengers and must

This forklift cannot carry passengers and must not be operated

not be operated

from outside the cab.

Mast Warning Label:

The inner and outer masts and fork carriage are vertically

sliding parts. DO NOT put your hand or

sliding parts. DO NOT put your hand or any other body part between

any other body part between

the inner and outer masts. Failure to

the inner and outer masts. Failure to follow this warning may lead to

follow this warning may lead to

serious bodily injury or

serious bodily injury or death.

death.

If there is a

If there is a need to inspect or maintain this part, DO NOT

need to inspect or maintain this part, DO NOT

perform the inspection or maintenance until after the engine has

been turned off and t

been turned off and the mast and carriage appropriately secured.

he mast and carriage appropriately secured.

https://www.forkliftpdfmanuals.com/

Содержание UT25C






















































































































































Результаты поиска

Содержание UT25C

Отзывы:

Похожие инструкции для UT25C

Бренды по названию

Популярные бренды

UTILEV UT25C, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание UT25C

Отзывы:

Похожие инструкции для UT25C

Бренды по названию

Популярные бренды