UTILEV UT25C Скачать руководство пользователя страница 36

Страница: 36 / 149

26.

Travel with load as low as possible and tilted

Travel with load as low as possible and tilted back.

back.

27.

Avoid braking too sharply or descending on a

grade at a high speed. There is danger of loads falling

down or the truck

down or the truck turning over.]

turning over.]

28.

Always brake to a full stop before reversing

direction of travel.

29.

Take the shape and material of the loads to be

handled into account when selecting the proper

handled into account when selecting the proper
attachment and tools.

attachment and tools.

Avoid

Avoid hoisting

hoisting the

the load

load with

with wire

wire rope

rope hung

hung from

from

the forks or the attachment, since wire rope may slide

the forks or the attachment, since wire rope may slide
off. If needed, qualified personnel should perform a

off. If needed, qualified personnel should perform a
sling operation, making use of a hook or crane arm

sling operation, making use of a hook or crane arm
attachment.

attachment.

Make sure the fork does not protrude from underneath

Make sure the fork does not protrude from underneath
the load. The protruding fork tips may damage or turn

the load. The protruding fork tips may damage or turn
over an adjacent load.

over an adjacent load.

30.

Know the rated capacity of your lift truck and its

attachment, if any, and never exceed it.

DO NOT use people as additional counterweights.

This is very dangerous.

31.

Load back rest is in place to prevent hitting the

higher goods. A load backrest is used to ensure stable

higher goods. A load backrest is used to ensure stable
loading. DO NOT use forklift truck when lifting more

loading. DO NOT use forklift truck when lifting more
than two items.

than two items.

https://www.forkliftpdfmanuals.com/

Содержание UT25C






















































































































































Результаты поиска

Содержание UT25C

Отзывы:

Похожие инструкции для UT25C

Бренды по названию

Популярные бренды

UTILEV UT25C, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание UT25C

Отзывы:

Похожие инструкции для UT25C

Бренды по названию

Популярные бренды