UTILEV UT25C Скачать руководство пользователя страница 40

Страница: 40 / 149

4. Operator Protection Equipment



The

The LOAD

LOAD BACKREST

BACKREST EXTENSION

EXTENSION is

installed to keep loose parts of the load from

installed to keep loose parts of the load from
falling back toward the operator.

falling back toward the operator.



It must

must be

be high

high enough,

enough, with

with vertical

vertical openings

openings

small enough, to prevent the parts of the load

small enough, to prevent the parts of the load
from falling backwards. If a load backrest

from falling backwards. If a load backrest
extension that is different from the one

extension that is different from the one
installed on your lift truck is required, contact

installed on your lift truck is required, contact
your Utilev lift truck dealer.

your Utilev lift truck dealer.



The

The OVERHEAD

OVERHEAD GUARD

GUARD is

is intended

intended to

to offer

offer

reasonable protection to the operator from

reasonable protection to the operator from
falling objects, but cannot protect against

falling objects, but cannot protect against
every possible impact. Therefore, it must not

every possible impact. Therefore, it must not
be considered a substitute for good judgment

be considered a substitute for good judgment
and care when handling loads. Do not remove

and care when handling loads. Do not remove
the overhead guard.

the overhead guard.



The

The SEAT

SEAT BELT

BELT AND

AND HIP

HIP RESTRAINT

RESTRAINT

provide additional means to help the operator

provide additional means to help the operator
keep the head and torso su

keep the head and torso substantially within

bstantially within

the confines of the lift truck frame and

the confines of the lift truck frame and
overhead guard if a tip over occurs. This

overhead guard if a tip over occurs. This
restraint system is intended to reduce the risk

restraint system is intended to reduce the risk
of the head and torso being trapped between

of the head and torso being trapped between
the lift truck and the ground, but it cannot

the lift truck and the ground, but it cannot
protect the operator against all possible injury

protect the operator against all possible injury
in a tip over. The hip restraint will help the

in a tip over. The hip restraint will help the
operator resist side movement. It is not a

operator resist side movement. It is not a
substitute for the seat belt. Always fasten the

substitute for the seat belt. Always fasten the
seat belt.

seat belt.

https://www.forkliftpdfmanuals.com/

Содержание UT25C






















































































































































Результаты поиска

Содержание UT25C

Отзывы:

Похожие инструкции для UT25C

Бренды по названию

Популярные бренды

UTILEV UT25C, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание UT25C

Отзывы:

Похожие инструкции для UT25C

Бренды по названию

Популярные бренды