UTILEV UT25C, Руководство по эксплуатации и обслуживанию

Страница: 41 / 149

35 35
5. Maintenance 5. Maintenance
See See
《 《
Preventive maintenance schedule Preventive maintenance schedule
》 》
for for
further information. further information.
5.1 Daily Maintenance 5.1 Daily Maintenance 8 hours 8 hours
1. 1. Check Leaks Check Leaks
Check LPG, electrolyte, hydraulic oil, brake fluid, Check LPG, electrolyte, hydraulic oil, brake fluid,
coolant, and oil in hydraulic transmission gear box coolant, and oil in hydraulic transmission gear box ..
Check the engine, hydraulic pipe connector, Check the engine, hydraulic pipe connector,
radiator and driving system for leaks. DO NOT use an radiator and driving system for leaks. DO NOT use an
open flame to check levels. open flame to check levels.
!! W Wa arrn niin ng g
： ：
DO NOT operate truck if leaked fuel is DO NOT operate truck if leaked fuel is
found following pre found following pre -- operational checks. operational checks.
Correct the leak before starting engine. Correct the leak before starting engine.
2. Check appearance 2. Check appearance
Visually check the lamps and meters for problems. Visually check the lamps and meters for problems.
Check the tires, tire pressure and the entire truck Check the tires, tire pressure and the entire truck
for loose bolts for loose bolts
3. Check Fuel Mass 3. Check Fuel Mass
A A fuel fuel level level gauge gauge is is provided provided on on the the indicator indicator
panel. Make sure the fuel level is sufficient for the panel. Make sure the fuel level is sufficient for the
day‘s work. The fuel filler port is located at the rear left day‘s work. The fuel filler port is located at the rear left
pillar of the overhead guard.
pillar of the overhead guard.
4. Engine Oil Level Check 4. Engine Oil Level Check
!! C Ca au uttiio on n
： ：
When checking the engine oil, place When checking the engine oil, place
forklift on level ground, set parking brake forklift on level ground, set parking brake
and lower forks to the
and lower forks to the ground. ground.
Check engine oil when the engine is Check engine oil when the engine is
cool. cool.
Remove the dipstick, clean the rod and reinsert. Pull it Remove the dipstick, clean the rod and reinsert. Pull it
out again and check the oil level. The level should be
out again and check the oil level. The level should be
within the marks on the dipstick.
within the marks on the dipstick.
https://www.forkliftpdfmanuals.com/