50
50
let hydraulic oil in all system. Check for leaks.
let hydraulic oil in all system. Check for leaks.
（
（
11
11
）
）
Close the engine, retract all mast cylinder rods,
Close the engine, retract all mast cylinder rods,
check the oil level of hydraulic oil box. Add oil at fill
check the oil level of hydraulic oil box. Add oil at fill
mark.
mark.
5. Change Hydraulic
5. Change Hydraulic Transmissi
Transmission Oil
on Oil
Refer to ‗Change hydraulic transmission oil‘ from
Refer to ‗Change hydraulic transmission oil‘ from
‗Maintain monthly‘.
‗Maintain monthly‘.
6. Check, clean, change fuel filter (Diesel)
6. Check, clean, change fuel filter (Diesel)
In the dust and dirty work condition, clean fuel
In the dust and dirty work condition, clean fuel
filters per one month and replace every six months.
filters per one month and replace every six months.
（
（
1
1
）
）
Remove out the fuel filter.
Remove out the fuel filter.
（
（
2
2
）
）
Remove transducer.
Remove transducer.
（
（
3
3
）
）
Before installing new one, install transducer
Before installing new one, install transducer
existing, put a little fuel on the filter airproof.
existing, put a little fuel on the filter airproof.
!! C
Ca
au
uttiio
on
n
：
：
Before installation, do not add fuel to
Before installation, do not add fuel to
filter, as this may accelerate the wear of
filter, as this may accelerate the wear of fuel
fuel
system parts.
system parts.
（
（
4
4
）
）
Install new filter.
Install new filter.
（
（
5
5
）
）
Turn the new filter till the airproof mat adheres to
Turn the new filter till the airproof mat adheres to
surface.
surface.
（
（
6
6
）
）
Screw down 2/3 turns.
Screw down 2/3 turns.
5.5 Annual Maintenance (2000 hours)
5.5 Annual Maintenance (2000 hours)
Perform the following maintenance in addition to
Perform the following maintenance in addition to
the semi-annual maintenance.
the semi-annual maintenance.
1. Replace the engine cooling fluid
1. Replace the engine cooling fluid
（
（
1
1
）
）
Open the radiator cover and loosen the drain
Open the radiator cover and loosen the drain
cover, let the coolant flow out, then wash the cooling
cover, let the coolant flow out, then wash the cooling
system.
system.
（
（
2
2
）
）
Screw down the drain cover.
Screw down the drain cover.
（
（
3
3
）
）
Add cooling fluid to radiator up to the top.
Add cooling fluid to radiator up to the top.
（
（
4
4
）
）
Let the engine r
Let the engine run fully.
un fully.
（
（
5
5
）
）
Stop the engine, after cool down fully, still add
Stop the engine, after cool down fully, still add
cooling fluid to radiator up to the top, and add cooling
cooling fluid to radiator up to the top, and add cooling
fluid to coolant reservoir ―MAX‖ position.
fluid to coolant reservoir ―MAX‖ position.
（
（
6
6
）
）
Check the
Check the drain cover
drain cover for
for leaks.
leaks.
https://www.forkliftpdfmanuals.com/
Содержание UT25C
Страница 85: ...79 79 10 Labels 10 Labels https www forkliftpdfmanuals com ...
Страница 90: ...84 84 7 7 Tip Over Warning Label Tip Over Warning Label https www forkliftpdfmanuals com ...
Страница 119: ...113 113 https www forkliftpdfmanuals com ...
Страница 139: ...133 133 IMPCO Single Fuel System IMPCO Single Fuel System https www forkliftpdfmanuals com ...
