UTILEV UT25C, Руководство по эксплуатации и обслуживанию

Страница: 137 / 149

131 131
(13) Before the cylinder is re-installed, the cylinder should be positioned according to the vertical installation mark on (13) Before the cylinder is re-installed, the cylinder should be positioned according to the vertical installation mark on
the cylinder body. Lay it so that it is steady, close the outlet shut-off valve, and open the inlet shut-off valve. the cylinder body. Lay it so that it is steady, close the outlet shut-off valve, and open the inlet shut-off valve.
When filling, watch the LPG level indicator needle to see if it rises synchronously as it is filled. Stop filling
When filling, watch the LPG level indicator needle to see if it rises synchronously as it is filled. Stop filling
immediately after the charge-limiting valve acts, and check the LPG level indicator needle to see if it is at the
immediately after the charge-limiting valve acts, and check the LPG level indicator needle to see if it is at the
normal position. After filling ends, close the inlet shut-off valve. normal position. After filling ends, close the inlet shut-off valve.
(14) Before the cylinder is used, check for leaks or other abnormalities. It may not be used with faults. (14) Before the cylinder is used, check for leaks or other abnormalities. It may not be used with faults.
(15) If an LPG leak is discovered while the forklift truck is operating, immediately switch off the LPG switch,
(15) If an LPG leak is discovered while the forklift truck is operating, immediately switch off the LPG switch,
and close the outlet valve. Check each unit of the device and fastener line connections for looseness and leaks, and close the outlet valve. Check each unit of the device and fastener line connections for looseness and leaks,
and handle problems promptly.
and handle problems promptly.
(16) If the forklift is stopped for more than 10 minutes, close the outlet valve. (16) If the forklift is stopped for more than 10 minutes, close the outlet valve.
(17) The cylinder should not be left out in the sun. Keep it away from heat sources and open flame. Absolutely DO
(17) The cylinder should not be left out in the sun. Keep it away from heat sources and open flame. Absolutely DO
NOT heat the cylinder with a heat source whose temperature is above 40 °C. NOT heat the cylinder with a heat source whose temperature is above 40 °C.
(18) DO NOT use up all the gas in the cylinder; leave residual gas equal to at least 0.5% of the specified fill quantity. (18) DO NOT use up all the gas in the cylinder; leave residual gas equal to at least 0.5% of the specified fill quantity.
(19) Absolutely DO NOT alter the embossed and color marks on the cylinder. (19) Absolutely DO NOT alter the embossed and color marks on the cylinder.
(20) In accordance with established testing dates, the cylinder must be delivered for periodic inspection to a testing
(20) In accordance with established testing dates, the cylinder must be delivered for periodic inspection to a testing
facility that is qualified as a pressure container safety supervision organization once every five years. facility that is qualified as a pressure container safety supervision organization once every five years.
(21) While operating the forklift truck, observe at all times changes in the cylinder gas volume. If the gas is being (21) While operating the forklift truck, observe at all times changes in the cylinder gas volume. If the gas is being
used up in a way that does not match operation time, stop the truck to check for gas leaks. If a leak is used up in a way that does not match operation time, stop the truck to check for gas leaks. If a leak is
discovered, then immediately turn off the power source and close all valves. Promptly take the appropriate
discovered, then immediately turn off the power source and close all valves. Promptly take the appropriate
measures.
measures.
(22) As much as possible, the forklift truck should be parked in a shady and well-ventilated area. Close the cylinder (22) As much as possible, the forklift truck should be parked in a shady and well-ventilated area. Close the cylinder
valves, and absolutely DO NOT allow the cylinder to remain exposed to sunlight. valves, and absolutely DO NOT allow the cylinder to remain exposed to sunlight.
(23) When the forklift truck enters a storage facility, turn off the power source and close all valves. The truck should (23) When the forklift truck enters a storage facility, turn off the power source and close all valves. The truck should
have good ventilation conditions and be subject to fire-fighting measures. have good ventilation conditions and be subject to fire-fighting measures.
(24) Absolutely DO NOT repair liquefied petroleum gas cylinders, valves, or lines while the truck is in storage or a (24) Absolutely DO NOT repair liquefied petroleum gas cylinders, valves, or lines while the truck is in storage or a
parking lot. The operator is strictly prohibited from smoking while on the truck. parking lot. The operator is strictly prohibited from smoking while on the truck.
https://www.forkliftpdfmanuals.com/