16
UNLOCK / REACTIVATION REMOTE CONTROL
READY
Activation
Power Off
1 After three minutes of inactivity, the remote control, to save energy enters in Sleep mode.
2 Press the info button for at least 2 seconds to activate and unlock the remote control.
3 The remote control is ready to commands.
ON OFF UNIT / SELECTION PROCEDURES AND SPEED
1 To activate the unit, first select the desired mode between extraction, input and cycle
2 Selection now the fan speed between min – average – max
EXAMPLE :
the picture beside showing the choise of the selection the automatic cicle mode and average speed. As it regards the only function extraction or only input
the unit after 30 minuts return automatically in cycle mode.
- To turn off the system, press the ON-OFF button.
REQUEST STATE SYSTEM
1 With active remote control is possible examine the system for understand the state and the active functions. Press the info button and wait that the remote
control lights the LEDs relative to the states. The remote control will show after a few seconds:
- Mode 'set
- Speed set
- Functions Sensors and night if active
EXAMPLE :
In the beside picture the remote control responded automatic cycle and maximum speed.
