3 When coupled the slave will light, flashing alternately, the led OUT, only extraction (led on the left), and the led IN, only input(central), alternating with the
LED IN/OUT of the automatic cycle (right).
Now it will be possible to select the operating mode of the unit compared to the master unit: input/extraction cicle.
-IIf you want that the unit recovery operation rotates in the opposite direction to the master, Press the out button (extraction) as in column A, up to which the
fan starts to rotate. The led at this point will flash alternately as indicate in column A. If you want that the slave units rotate parallel to the master, press the IN
button (input) as in column B, up to which the fan starts to rotate.
he led at this point will flash alternately as indicate in column B.
4 Confirm your choice by long pressing the button IN/OUT cicle and wait for the temporary cessation of the fan that later will resume operation.
5 Put the remote control near the second slave and repeat the configuration. The same system in succession for all slaves
12
Max 5 cm.
A
B
Max 5 cm.
Max 5 cm.
Max 5 cm.
Max 5 cm.
