UTC Fire and Security Kidde AirSense SynaG Series, Руководство по установке

Страница: 89 / 104

Appendix A: Configuration presets
SynaG Series Installation Manual 83
BS 5839-1
Table 52: Configuration presets
Preset Control panel EOL type Output type Sounder
outputs
[1]
Zone type
11 Two-zone Active Class B 2 (stage 1 “Alert”) Mixed
11 Four-zone,
eight-zone
Active Class B 4 (stage 1 “Alert”) Mixed
12 Two-zone Active, CleanMe
enabled
Class B 2 (stage 1 “Alert”) Mixed
12 Four-zone,
eight-zone
Active, CleanMe
enabled Class B 4 (stage 1 “Alert”) Mixed
13 Two-zone Active Class B 2 (stage 2
“Evacuation”) Mixed
13 Four-zone,
eight-zone
Active Class B 4 (stage 2
“Evacuation”) Mixed
14 Two-zone Active, CleanMe
enabled [2]
Class B 2 (stage 2
“Evacuation”) Mixed
14 Four-zone,
eight-zone
Active, CleanMe
enabled [2] Class B 4 (stage 2
“Evacuation”) Mixed
[1] Stage 1 “Alert”: sounders off during any configured sounder delay.
Stage 2 “Evacuation”: sounders intermittent during any configured sounder delay.
[2] The CleanMe feature is available only with Aritech detectors.
Table 53: Additional configuration characteristics
Default sounder delay 0
Default zone delay 0n
Start/Restart sounders Start sounders or restart stopped sounders at Operator user
level with or without a fire alarm event
Table 54: Inputs and outputs
INPUT1 Class change
INPUT2 Delays off
OUT1 Sounder circuit
OUT2 Sounder circuit
OUT3 Sounder circuit
OUT4 Sounder circuit
Note: Two-zone control panels have only two outputs with EN 54-13 disabled (OUT1 and OUT2)
or a single output with EN 54-13 enabled (OUT1/2).