UTC Fire and Security Kidde AirSense SynaG Series, Руководство по установке

Страница: 54 / 104

Chapter 3: Configuration and commissioning
48 SynaG Series Installation Manual
Display Description Operating mode
Extended fire routing delay
Input active configures extended fire routing delay.
EN 54-2
EN 54-2 Scandinavian
NEN 2535
Fire routing inhibit delay
Input active deactivates fire routing delays.
EN 54-2
EN 54-2 Scandinavian
NEN 2535
Class change
Sounders are activated while the input is active
All
Fault warning output open supervision
An inactive input indicates the fault warning output
has an open circuit wiring fault.
NEN 2535
Fire routing acknowledgement (type 1, 100 seconds)
[1] [3]
An active input indicates acknowledge after fire
routing is active. An active input in other condition
generates a fire routing fault.
EN 54-2
EN 54-2 Scandinavian
NEN 2535
Fire routing acknowledgement (type 2, 240 seconds)
[1] [3]
An active input indicates acknowledge after fire
routing is active. An active input in other condition
generates a fire routing fault.
EN 54-2
EN 54-2 Scandinavian
NEN 2535
FBF interface (sounders disabled) [2] [3]
Active input disables sounders and silences the
control panel.
EN 54-2
EN 54-2 Evacuation
EN 54-2 Scandinavian
NEN 2535
BS 5839-1
[1] May only be configured for one input per control panel.
[2] Regional fire brigade panels. May only be configured for one input per control panel.
[3] Supervision for wiring open and short conditions available. A 15 k Ω end-of-line is required.
Changing user level passwords
Use the corresponding menu option (shown below) to change the default user
level passwords.
Operator user level password
Basic installer user level password
Advanced installer user level password