Utax P-3020 MFP Скачать руководство пользователя

Страница: 416 / 481

11-8

Management

Press the





key to select [Exit] and then press the

key.

Select [Detail] and press the

key to see information

of the registered users.

In Local User List, press the





key to select the

added user and then press the

key.

Press the





key to select [Login Password:], press

[Edit] (the

Right Select

key), enter the login password,

and then press the

key.

Enter the same login password to confirm and press the

key.

Press the



key to select [E-mailAddress:], press [Edit]

(the

Right Select

key), enter the e-mail address, and

then press the

key.

Press the



key to select [Access Level:], press

[Change] (the

Right Select

key), select the user access

privilege, and then press the

key.

NOTE:

If the user list is for device administrator, [Change]

is not displayed.

Press the



key to select [Account Name:], press

[Change] (the

Right Select

key), select the account, and

then press the

key.

NOTE:

If the user list is for device administrator and the

device administrator does not log in, [Change] is not
displayed.

After entering the user information, press the

key

again.

Registered.

is displayed and the screen returns to Local

User List.

User01:

*********************

Detail

Exit

Local User List:

DeviceAdmin

Admin

*********************

[ Menu

]

User 1

Detail:

3/6

OOOOOOOOOOO

[ Edit

]

Detail:

E-mailAddress: 4/6

******@abcdef.jp

[ Edit

]

Detail:

Access Level:

5/6

Administrator

[ Change ]

Detail:

Account Name:

6/6

RD Center

[ Change ]

Содержание P-3020 MFP


































































































































































































































































































































































































































































































Результаты поиска

Содержание P-3020 MFP

Отзывы:

Похожие инструкции для P-3020 MFP

Бренды по названию

Популярные бренды

Utax P-3020 MFP, Руководство пользователя

Результаты поиска

Содержание P-3020 MFP

Отзывы:

Похожие инструкции для P-3020 MFP

Бренды по названию

Популярные бренды