Utax P-3020 MFP Скачать руководство пользователя страница 406

Страница: 406 / 481

10-16

Troubleshooting

Remove the drum unit from the machine by holding the
green levers with both hands.

CAUTION:

The fuser unit inside the machine is hot. Do not

touch it, as it may result in burn injury.

NOTE:

The drum is sensitive to light. Never expose the

drum unit to light for more than five minutes.

If the jammed paper appears to be pinched by rollers,
pull it along the normal running direction of the paper.

Return the drum unit to its position, aligning the guides at
both ends with the slots in the machine.

Insert the developer unit together with the toner
container, back into the machine. Close the front cover.
The machine warms up and resumes printing.

Содержание P-3020 MFP


































































































































































































































































































































































































































































































Результаты поиска

Содержание P-3020 MFP

Отзывы:

Бренды по названию

Популярные бренды

Utax P-3020 MFP, Руководство пользователя

Результаты поиска

Содержание P-3020 MFP

Отзывы:

Бренды по названию

Популярные бренды