Utax LP 3036, Инструкция по эксплуатации

Страница: 42 / 113

Chapter 3 Using the Operator Panel
3-26
Press the
3
or
4
key repeatedly until
>Pitch
ap-
pears.
Press the ENTER key. A blinking cursor (
_
) appears.
Press the 3 or 4 key to increase or decrease the value
of the figure where the cursor is blinking. The character
pitch can be set between 0.44 and 99.99 characters
per inch, in 0.01 character-per-inch increments. You
can use the
2 and 1 keys to move the cursor right and
left.
When the desired size is displayed, press the ENTER
key.
Press the MENU key. The message display returns to
Ready
.
Printing a List of Fonts
To help in selecting fonts, you can print a list of the fonts includ-
ing option fonts.
Press the MENU key.
Press the
3
or
4
key repeatedly until
Font >
appears.
Press the
2
key.
Press the 3 or 4 key repeatedly until
List of In-
ternal Fonts
appears.
List of Option Fonts
appears.
(Internal Fonts)
(Optional Fonts)
Press the ENTER key. A question mark (
?
) appears.
(Internal Fonts)
(Optional Fonts)
Press the ENTER key again.
Processing
appears,
then
Ready
. The printer prints a list of fonts with a short
sample and font ID (number) for each font.
List of Fonts
2.2.7 Using Page Set Menus
In Page Set menus, you can set the number of copies, the page
orientation, and other settings regarding pagination.
Setting the Number of Copies
You can set the number of copies to be printed of each page for
the current interface. The number of copies can be set between
1 and 999. The number of copies can be set whenever the mes-
sage display indicates
Ready
.
Press the MENU key.
>Pitch
10.00 cpi
>Pitch
10.00 cpi
Font >
>List of
Internal Fonts
>List of
Option Fonts
5
6
7
8
9
1
2
3
4
>List of
Internal Fonts?
>List of
Option Fonts ?
5
6
1