Utax DP 770, Руководство по обслуживанию

Страница: 97 / 107

3NV
2-2-2
(2) Switches and sensors
Figure 2-2-2 Switches and sensors
1. DP open/close switch (DPOCSW) ........ Detects the opening/closing of the DP.
2. DP interlock switch (DPILSW) .............. Breaks the safety circuit when the document processor is
opened; resets original misfeed detection.
3. DP original sensor (DPOS) ................... Detects the presence of an original.
4. DP lift sensor1 (DPLS1)........................ Detects the original tray reaching the upper limit.
5. DP lift sensor2 (DPLS2)........................ Detects the original tray reaching the lower limit.
6. DP original length switch (DPOLSW).... Detects the length of the original.
7. DP original width switch (DPOWSW).... Detects the width of the original.
8. DP feed sensor (DPFS) ........................ Detects primary original feed end timing.
9. DP registration sensor (DPRS) ............. Detects the original conveying timing.
10. DP timing sensor (DPTS)...................... Detects the original scanning timing.
11. DP switchback sensor (DPSBS) ........... Detects the original in switchback tray section.
12. DP eject sensor (DPES) ....................... Detects an original misfeed in the original eject section.
1
2
6
7
8
11
12
9
3
5
4
10
Machine inside Machine front Machine rear