Utax DP 770, Руководство по обслуживанию

Страница: 55 / 107

3NV-2
1-3-34
U411 Method: Table (Chart1)
To manually enter the target value
1. Enter the target values which are shown on the specified original (P/N: 7505000005) execut-
ing maintenance item U425.
2. Set a specified original (P/N: 7505000005) on the platen.
3. Enter maintenance item U411.
4. Select [Target].
5. Select [U425] and then press the start key.
6. Select [Table (Chart1)].
7. Select the item to be operated.
To automatically enter the target value
1. Enter the value for [Adjust Original] using maintenance item U425.
2. Set a specified original (P/N: 7505000005) on the platen.
3. Enter maintenance item U411.
4. Select [Target].
5. Select [Auto] and then press the start key.
6. Select [Table (Chart1)].
7. Select the item to be operated.
8. Press the start key. Auto adjustment starts.
* : When automatic adjustment has normally completed, [OK] is displayed. If a problem
occurs during auto adjustment, [NG XX] (XX is replaced by an error code) is displayed
and operation stops. Should this happen, determine the details of the problem and repeat
the procedure from the beginning.
Method: DP Face Up (Chart1)
To manually enter the target value
1. Enter the target values which are shown on the specified original (P/N: 7505000005) execut-
ing maintenance item U425.
2. Set a specified original (P/N: 7505000005)(front face) in the DP.
3. Enter maintenance item U411.
4. Select [Target].
5. Select [U425] and then press the start key.
6. Select [DP Face Up (Chart1)].
7. Select [Input].
Item No. Description
Display Description
All
All scanner adjustments
LED/AGC
LED quantities of light adjustment/AGC adjustment
White
White, standard correction coefficient adjustment
Input Original size magnification/Leading edge timing/Center line
adjustment
C.A.
Chromatism filter adjustment
MTF
MTF filter adjustment
Gamma
Input γ adjustment
Matrix
Matrix adjustment