Utax DP 770 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 107

Utax DP 770 Скачать руководство пользователя страница 73

3NV

1-4-6

(5)
DP switchback
motor does not
operate.

1. Defective connector

cable or poor con-
tact in the connector.

Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
DP switchback motor and DP main PWB (YC14)

2. Defective connector

cable or poor con-
tact in the connector.

Check if the rollers and gears rotate smoothly. If not,
grease the bushes and gears. Check for broken gears and
replace if any.

3. Defective motor.

Replace the DP switchback motor.

4. Defective PWB.

Replace the DP main PWB and check for correct operation.

(6)
DP lift motor does
not operate.

1. Defective connector

cable or poor con-
tact in the connector.

Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
DP lift motor and DP main PWB (YC5)

2. Defective connector

cable or poor con-
tact in the connector.

Check if the rollers and gears rotate smoothly. If not,
grease the bushes and gears. Check for broken gears and
replace if any.

3. Defective motor

Replace the DP lift motor.

4. Defective PWB.

Replace the DP main PWB and check for correct operation.

(7)
DP switchback
feedshift solenoid
does not operate.

1. Defective connector

cable or poor con-
tact in the connector.

Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
DP switchback feedsift solenoid and DP main PWB (YC9)

2. Defective solenoid

Replace the DP switchback feedsift solenoid.

3. Defective PWB.

Replace the DP main PWB and check for correct operation.

(8)
DP switchback
pressure solenoid
does not operate.

1. Defective connector

cable or poor con-
tact in the connector.

Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
DP switchback pressure solenoid and DP main PWB (YC9)

2. Defective solenoid

Replace the DP switchback pressure solenoid.

3. Defective PWB.

Replace the DP main PWB and check for correct operation.

(9)
An original jams
when the main
power switch is
turned on.

1. A piece of paper torn

from an original is
caught around the
DP feed sensor, DP
registration sensor,
DP timing sensor,
DP switchback
sensor, DP eject
sensor.

Check visually and remove it, if any.

2. Defective sensor.

Replace the DP feed sensor, DP registration sensor, DP
timing sensor, DP switchback sensor or DP eject sensor.

3. Defective PWB.

Replace the DP main PWB and check for correct operation.

Problem

Causes

Check procedures / corrective measures

«
...
71
72
73
74
75
...
»

Содержание DP 770












































































































Отзывы:

Нет отзывов