Utax CD 1230 Скачать руководство пользователя страница 108

Страница: 108 / 302

2GN/2GP/2GR

1-3-77

U910

Clearing the black ratio data
Description

Clears the accumulated black ratio data for A4 sheet.

Purpose

To clear data as required at times such as during maintenance service.

Method

1. Press the start key.
2. Press [EXCUTE] on the touch panel.
3. Press the start key. The accumulated black ratio data is cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U911

Checking/clearing copy counts by paper sizes
Description

Displays and clears the paper feed counts by paper sizes.

Purpose

To check or clear the counts after replacing consumable parts.

Method

Press the start key. The screen for the paper feed counts by paper size is displayed.

Clearing

1. Select the paper size.

To clear all counts, press the clear key.

2. Press the start key. The count is cleared.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U920

Checking the copy counts
Description

Checks the copy counts.

Purpose

To check the copy counts.

Method

Press the start key. The current counts of copy counter, printer counter and fax counter are displayed.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U927

Clearing the all copy counts and machine life counts (one time only)
Description

Resets all of the counts back to 0.

Purpose

To start the counters with value 0 when installing the machine.

Supplement

The total account counter and the machine life counter can be cleared only once if all count values are 1000
or less.

Method

1. Press the start key.
2. Press [EXECUTE] on the touch panel.
3. Press the start key. All copy counts and machine life counts are cleared.

[CANNOT EXECUTE] is displayed if the count cannot be cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U928

Checking machine life counts
Description

Displays the machine life counts.

Purpose

To check the machine life counts.

Method

Press the start key. The current machine life counts is displayed.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Содержание CD 1230















































































































































































































































































































Результаты поиска

Содержание CD 1230

Отзывы:

Похожие инструкции для CD 1230

Бренды по названию

Популярные бренды

Utax CD 1230, Руководство по обслуживанию

Результаты поиска

Содержание CD 1230

Отзывы:

Похожие инструкции для CD 1230

Бренды по названию

Популярные бренды