UIT2400 INSTRUMENTATION MANUAL REV A, May 2020
16 OF 18
2.
Touch the “Select Location” box to open the drop down selection window.
3.
To choose and existing address: Use the scroll bar to highlight the address. Touch the
address to apply. The address will not show in the Select Location box.
Note: Addresses can also be imported into the UIT2400, by creating a custom Survey-
locations.txt and uploading through the USB micro port.
4.
To Add or Delete of the addresses list and touch Add/Delete location.
5.
To Delete: Touch in side the grey the drop down menu from the top box, Cursor to the
location that is to be removed, Touch the location to apply, With the box showing the
location, touch the “Del” delete button. The Delete buttons border will turn blue to
indicate completion. If you want to back out of Delete, scroll to the top and select the
blank line above the addresses.
6.
To Add: Touch inside the white add box. Use the keyboard to add an address or a note.
Touch the Add. The add border will turn blue to indicate the new address has been
saved.
7.
When done adding and deleting addresses, touch the < Back button.
8.
To apply an existing location click in the Select location box. Use the scroll bar to
highlight the address. Touch the address to apply. The address will now show in the
Select Location box.
9.
To save reading(s) touch the capture button. Readings will be saved to the
Survey_data_file.csv file, accessible fie the usb micro port.
20. Info:
Lists product and software settings including model no, serial no, calibration information,
software and firmware information and user programmable selections such as sample time,
range selection etc.
21. Upgrades
Ushio offers software and firmware upgrades at no additional cost as they become available.
Though extensive testing on the internal and external datalight software has been done, there
is a chance we may find a small bug or an area that we can improve upon over time. Ushio
will inform customers if firmware upgrades become available and provide instructions how to
obtain and install them.
22. Datalight software for Windows 7, 8 or 10 PC:
The UIT2400 can be connected to a computer via the USB mini port and be controlled by
external software. Datalight III software is available for download on the website:
http://www.intl-lighttech.com/support/software.
You will be brought through a simple set of “Next”, “Next”, “Finish” steps.
Once you have installed the Datalight III software, Turn on your UIT2400 and allow initialization
to complete. After completion, Plug the UIT2400 into any available USB port or a hub
connected to the computer. Wait up to 2 minutes for the drivers to install. You can verify a USB
port has been assigned properly using device manager, under Ports (COM & LPT) as seen in
the following image:
