Wireless MAXg USB Adapter: User Guide
broadcasts a Clear To Send message. This message tells the requesting adapter to send
its message while telling other adapters to refrain from sending data while the requesting
adapter sends its message. In environments where there are frequent data collisions
between wireless adapters, decreasing the RTS threshold can decrease collisions and
improve network performance. However, each RTS/CTS handshake adds communication
overhead that can decrease network performance.
The default value is 2347. The range is 0 to 2347.
WMM
Wi-Fi Multimedia (WMM™). The WMM property enables
and voice applications over a wireless network by prioritizing streams of content and
optimizing the way the network allocates bandwidth among competing applications.
Auto
(default). With WMM set to Auto, when the wireless client connects to the access
point, and the access point has Unscheduled Automatic Power Save Delivery (UAPSD)
enabled, the wireless client is allowed to enter Power Save mode.
Enabled
The wireless client enters Power Save mode for WMM associations independent
of whether the access point has UAPSD enabled or disabled.
Disabled
The wireless client does not have WMM association.
WZC IBSS Channel Number
The WZC IBSS Channel Number property selects the independent basic service set
(IBSS) channel number on which to operate when WZC is managing your wireless
networks. The default setting is 11.
© 2005-2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5425...Refresh%20USB/User%20Guide/English/config_vista.html (20 of 20)6/26/2007 9:29:33 AM