Wireless MAXg USB Adapter: User Guide
4. Select a wireless device.
5. If you do not see the correct device, click
Refresh
to update the list. If you still do
not see the correct device, click
Cancel
and manually enter the Network Name of
the device.
6. Click
Ok
.
7. Enter the appropriate connection and security information for the wireless network
device, if applicable, and click
OK
.
8. Click
OK
and the Wireless
MAX
g USB Adapter will attempt a connection to the
wireless network. If the card or adapter does not connect to the wireless network,
open the Wireless Networks tab in the USRobotics Wireless Utility, select the
wireless network, and click
Edit
. Verify that the information for the wireless
network device is correct and click
OK
.
Windows Me or 98SE
There are two methods you can use to create a wireless connection.
Using the Quick Connect screen
1. Left-click once on the Utility icon to open the Quick Connect screen.
2. Select a wireless network device in the Available networks screen.
3. If security is enabled for the specified wireless network device, enter the
Network
key
and click
Connect
. If security is not enabled for the specified wireless network
device, select the checkbox for
Allow me to connect to the selected wireless
network, even though it is not secure
and then click
Connect
.
4. You should now be connected to the specified wireless network device. If you
experience any problems creating a connection, click
Advanced
to access the
USRobotics Wireless Utility.
file:///G|/CSO/T-Writer%20Repository/Networking/5425%...efresh%20USB/User%20Guide/English/config_connect.html (4 of 5)6/26/2007 9:21:31 AM