URYU UBX-AF Series, Инструкция по эксплуатации

Страница: 8 / 26

1. Product Description & Features
1.1 Introduction
Congratulations on your selection of the new generation of URYU cordless transducerised hydraulic
impulse tool, UBX-AF. Taking environmental issue into consideration, UBX-AF series adopt electricity
(battery) as the drive power source. UBX-AF tool has an electric motor driving a hydraulic impulse
mechanism for tightening and loosening threaded fasteners. UBX-AF tool fitted with the new pulse
mechanism and high-power electric motor improves operator comfort (low noise, low vibration and low
torque reaction) and energy efficiency.
1.2 Intended Use
- UBX-AF tool is intended for driving in and loosening nuts and bolts as well as for tightening and
loosening nuts within the respective range of dimension.
- The tool is intended for professional use only.
- Avoid misuse and abuse of the tool. (e.g. Do not throw the tool on the floor, strike the housing in any
way or use the tool as a hammer to knock material into place.)
1.3 Features
1) High Productivity / Low Noise / Low Vibration / Low Torque Reaction
Hydraulic impulse mechanism provides quick tightening with low noise, low vibration and low torque
reaction.
・
Vibration total value : < 2.5m/s
2
・
Sound pressure level : < 73dB
2) Battery-Powered
⇒
Cordless
⇒
Flexible
UBX-AF tool provides you with flexible production line build and layout change.
3) ZigBee Wireless Communication
UBX-AF**Z tool has a ZigBee board and communicates wireless, which provides you with flexible
fastening through ZigBee coordinator.
4) High precision fastening is achieved by adjustable motor speed and power.
Motor power is settable in 2 steps from 4 levels;
①
Initial Current: from start ON to START torque
②
Current: from START torque to CUT torque
Motor speed is settable in 2 steps per 100min
-1
increments from 1000 min
-1
to 4800 min
-1
per work.
(For UBX-AF500Z, motor speed is settable from 1000min -1 to 3600min -1 .)
①
Initial Speed: from start ON to START torque
②
Rotation Speed: from START torque to CUT torque
Speed increases in 3 steps as you pull the trigger progressively.
500min -1
→
1,000 min -1
→
Initial Speed Value
5) Built-in Controller Board
High precision fastening is achieved in this single tool.
6) Torque Control & Angle Monitor
Non-contact strain gauge torque sensor : torque measurement in 0.1Nm
Angle encoder : angle measurement in 1 degree
7) Casing Made of Resin
⇒
Light Tool Weight
Tool casing made of resin realizes lighter in weight.
6