URYU UBX-AF Series, Инструкция по эксплуатации

Страница: 5 / 26

Power Tool Use and Care
・
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the trigger is dangerous and must be repaired.
・
Detach the battery pack from the power tool before making any adjustments, changing accessories
or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
・
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
・
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
・
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
・
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the power tool in unexpected situations.
・
Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting ‘live’ wire may make exposed metal parts of the power
tool ‘live’ and could give the operator an electric shock.
Power Tool Use and Care
・ Unless otherwise required, do not make idle running at free speed.
・
When disposal, handle as industrial waste (Recycle Separation : PP-GF30).
Battery Tool Use and Care
・
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
・
Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
3
・
Do not leave the tool, battery and charger inside a vehicle or in places where
the temperature may exceed 40°C.
・ Do not place the tool as shown on the left figure. Supporting the tool only
on the two points may damage the battery casing. It is recommended to
use a URYU genuine tool holder to keep the tool at workplace.