URYU UBX-AF Series, Инструкция по эксплуатации

Страница: 14 / 26

3. Components & Function
3.1 Tool Appearance
Index Part Purpose Reference
1) Anvil Rotating part to fit socket depending upon purpose. Square Anvil Type
2) Trigger Operates (ON/OFF) the tool
3) Fwd / Rev Lever Changes the direction of rotation
Operator can change rotations by single
hand.
4) LED Work Light Illuminates work area LED helps to install fasteners in dark areas.
5) OK/NOK Judgement LED Tube Fastening Judgement
Green: OK
Red: NOK
6) Grip Switch Activates the built-in controller unit
7) Battery Power Indicator
Indicates charge capacity level of the battery
Green indicates that the battery pack is over
40% of its charge capacity.
⇒
Keep using.
Amber indicates that the battery pack is 40% or
less of its charge capacity.
Red indicates that the battery pack is nearly
depleted and needs recharging immediately.
Off: EMPTY (Battery level 0%)
Note: Tool will stop after completion of the
last tightening when the battery power
indicator turns red.
8) Suspension Bail & Suspension Hole Suspends the tool 8)-1: Suspension Ring Assembly (option)
9) ZigBee Communication LED Confirms ZigBee communication
When it is ON, ZigBee communication is
alive.
10) PAN ID changing spot Changes ZigBee communication ID by the switch
11) Setting writing spot Writes ZigBee communication setting
12) Handle Gripping area while operating and carrying the tool
12
10) PAN ID changing spot
9) ZigBee Communication LED
7) Battery Power Indicator
1) Anvil
UBX-AF*00Z
8) Suspension Bail Hole
8)-1Suspension Ring Assembly
(option)
Motor
6) Grip Switch
Ventilator
Pulse Unit
Sensor
4) LED Work Light
2) Trigger
3) Fwd / Rev Lever
5)OK/NOK Judgement LED Tube
Battery
Controller Section
11) Setting writing spot
12) Handle