URYU UBX-AF Series, Инструкция по эксплуатации

Страница: 19 / 26

Pulse Fluid
Maintenance Instructions
・
Continuous satisfactory operation depends upon proper tool care and regular maintenance.
・
Have your power tool serviced by a qualified repair person.
・
Use URYU genuine parts for replacement. This will ensure that the safety and the optimum performance of
the tool are maintained. Refer to the parts list and use correct jigs for proper service.
・
UBX-AF is a precision tool. When disassembly / assembly / adjustment, exclusive jigs, tester and special
techniques are required. Defective disassembly / assembly / adjustment may cause not only insufficient
performance but also an accident. When overhaul, contact your local URYU distributor or URYU Japan.
・
Remove the battery from the power tool before carrying out work on the power tool (e.g. maintenance,
changing socket etc.). There is risk of injury from unintentionally pressing the trigger.
Lubrication
・
For the bearing, coat one-third of the bearing with high quality grease,
Multemp PS No. 2 (see the right table) or equivalent.
Overhaul
・ It is recommended that after every 5,000,000 pulses or 6 months,
replace the pulse fluid.
・ It is recommended that after every 10,000,000 pulses or 12 months, the pulse unit should be inspected
with care. Inspect hard parts for damages or wearing. Replace damaged parts, all sealing materials such
as X-ring, O-rings and supporter rings and consumable materials each time you disassemble the pulse unit.
・ More frequent overhaul may be required when the tool is in heavy duty operation.
・ Wipe the casing with a soft cloth. Do not use volatile liquid or a wet cloth as it would cause deterioration of its
strength and discolouration.
・ Regularly clean the power tool’s air vents. The ventilator can draw the dust inside the housing and excessive
accumulation of powdered metal may cause electrical hazards.
・ Ensure that any labels on the tool are kept in legible condition. Replace any damaged label.
17
URYU Code Quantity
998-712-0 300g
998-711-0 18kg
Multemp PS No. 2
URYU Code Quantity
998-735-0 20L