urmet domus ELEKTA STEEL, Инструкция по установке, программированию и использованию

Страница: 87 / 92

87
DS1083-046A
Each column may have up to two secondary modules. Set the identi fi cation
code (ID) of the secondary module in the riser on the keypad and press OK to
con fi rm the selection.
Permitted values: 0 or 1.
Secondary module ID errors will only be shown when exiting
con fi guration mode and returning the device to normal operating
mode.
The next items on the menu are the same ones found in points 8.3.9 to 8.3.22.
14.3. BLOCKS
After exiting the CONFIGURATION MENU, the home page will present the
following
The default names assigned to the single blocks can be edited in the second
level BLOCKS menu. A number offset for apartments can be assigned and the
default name and offset of each block can be restored.
This page shows the blocks con fi gured to be called by the calling module.
Use the arrows to select the name to be customised and press OK to con fi rm.
The digit which appears
by the left of the name is the column address which
identi fi es the block and obviously cannot be changed .
The name-block list sorted by column address appears under the MODIFY
menu.