58
DS1083-046A
The main menu will appear if the correct password was entered.
The procedure for programming all calling module parameters is described below.
Some parameters do not need to be programmed. Select only the relevant menu items if some
default values are already correct or to modify only some parameters of a previously con
fi
gured
module;
but you still need to con
fi
rm all of the options until the last parameter
.
8.2. LANGUAGE
The language used by the device for all menus and displayed messages can be modi
fi
ed using the
second level LANGUAGE menu.
Select LANGUAGE on the main menu. The menu shown here by the side will
appear.
Select the language used for the menu with the
buttons and press
OK
to con
fi
rm. All the languages will appear in the selected language after having
selected the language.
The page shown here by the side will appear if Hebrew is selected.
Press
OK
to restart the device. The menu in Hebrew will then
appear. Press
X
to go back to the main page of the con
fi
guration
with the previously used language.
8.3. CONFIGURATION
The second level CONFIGURATION menu is used to edit the various calling module operating parameters
as needed.
IMPORTANT:
Follow the con
fi
guration procedure to the end to save the new settings permanently even
if only a few parameters need to be changed.
Содержание ELEKTA STEEL
Страница 91: ...91 DS1083 046A...
