56
DS1083-046A
Door lock
release type
and time
The door unit lock release type and lock output
activation time.
The type may be:
SECRET: pressing the door opener button on
an apartment station will activate the door unit
output only after having received a call or during
a conversation or following auto-on if a video
connection has been established.
FREE: pressing the door opening button on an
apartment station will activate the door unit output
only if the door unit is con
fi
gured as primary station
or if the user and the secondary door unit belong to
the same riser.
Type: SECRET,
FREE
Time: 0 ÷ 90 s
Type:
SECRET
Door Lock 1
release time: 1s
Door Lock 2
release time: 0s
Password
Four-digit password for accessing the calling module
programming mode.
1000 ÷ 9999
1000
LCD backlight
This is used to adjust the brightness of the display to
adapt it to environment conditions.
1 ÷ 5
3
Button sound
This enables a tone when a button is pressed.
YES, NO
YES
Multitouch call
The parameter de
fi
nes where to route the call
generated by pressing at least three buttons at
the same time (Multitouch call) if the system is not
provided with concierge switchboard or if this is
present but con
fi
gured in NIGHT mode.
This must be a physical code if the
parameter is programmed.
XYABC, with
XY = 00 ÷ 31
ABC =
000 ÷ 127
EMPTY
Welcome
message
Message which appears on the main page of the
menu on the calling module.
32 characters on
2 lines
URMET
Time zone
Setting up the time zone of the calling module.
YES, NO
NO
Date and time
For setting date and time of the calling module.
EMPTY
Day
For setting the day of the week.
MONDAY
Postman
This allows to open the pedestrian doors (during
the programmed time) simply by pressing the T or P
button on the short-cut menu of the calling module.
YES, NO
NO
Names
This setting is used to pair names to user codes
(user repository).
Up to 4200
names
Vocal synthesis If active, calls and door opening events are described
by speci
fi
c voice messages in the set language.
YES, NO
NO
Switchboard
To be activated if the video door phone system is
provided with concierge switchboard.
YES, NO
NO
8. PROGRAMMING
PROCEDURE
The device is programmed using a speci
fi
c password-protected multiple level menu.
The menu options can be scrolled and selected, together with the parameter values, by using the
buttons. Press
OK
to con
fi
rm the selection.
Press
X
to cancel the selection and go back to the previous menu level.
To exit the con
fi
guration, press
X
until the home page of the calling module appears.
IMPORTANT:
the steps for the con
fi
guration of the reader transponder keys should be ignored when
programming modules 1083/25 and 1083/27.
Содержание ELEKTA STEEL
Страница 91: ...91 DS1083 046A...
