66
DS1083-046A
The time slots during which the postman function is activated can be
selected.
The days of the week (starting from MONDAY) are shown in sequence.
Select whether to activate the postman function on the indicated day with the
buttons and press
OK
to con
fi
rm.
The start and end time of the service will appear if the postman function was
enabled for the day.
Set the start time and then the end time in hh:mm format using the keypad
(permitted values: 00:00 ÷ 23:59).
Press
OK
to con
fi
rm.
Press
C
on the short-cut menu to delete the entered number if you make a
mistake.
Start time coinciding with the end time or end time before the start time will be
considered errors.
The page shown here by the side will appear and the keypad will be deactivated
for approximately three seconds in case of error.
Repeat the postman function programming procedure and select the service
times for the other days of the week.
Each day of the week and the respective service times can be selected
independently.
Select the
T
or
P
icon which will appear over the right short-cut menu using
the
buttons to indicate that the postman function is available and press
OK
to con
fi
rm.
The icon will only appear on the display during the times when the
postman function is enabled.
Содержание ELEKTA STEEL
Страница 91: ...91 DS1083 046A...
