urmet domus 1097/564, Руководство пользователя/Instruction, Страница: 39 / 152

DS1097-010 39
•
Post Recording : You can set how long after an event occurs that the HVR will continue to record.
•
Latch Time : To configure the external alarm time when the detection is triggered.
•
Alarm Out : If your HVR support to connect to external alarm device, you can set to emit an alarm tone.
•
Show Message: A letter “S” will be displayed on the screen when the intelligent detection is triggered.
•
Send Email: If an alarm is triggered, an Email will be sent to your preset email account.
•
Full Screen: When the detection is triggered, the channel will be enlarged into full screen.
•
Record Channel: to select the channel(s) you want to record when a detection is triggered.
•
Area: Click [ Setup ] to draw a virtual region in the camera picture.
Choose one of the Rule Number. It is the number of SOD area. Maximum 4 areas you can set for SOD function.
To enable the detection in
Rule Switch .
Choose a Rule Type .
Legacy : HVR will only detect the left-over objects;
Lost : HVR will only detect the lost objects;
Legacy & Lost : HVR will detect both left-over & lost objects.
Use your mouse to click 4 points in the camera picture to draw a virtual region. The sharp of the region should be
a convex polygon. Concave polygon will be not able to save.
Click Save to save your settings.
If you want to adjust the size of the region, click the red box in the region, the borders of the region will be
changed to red color. Long press the left button of your mouse to move the whole region, or drag the corners to
resize the region.
If you want to remove one of the regions from the camera picture, click the red box in the region and then click
Remove button. Click Remove All will delete all regions.
Notice:
o
The area for detection shall be greater than or equal to the size of the detected object, such as the detection
of a white bottle.
o
The detected object cannot be covered.