urmet domus 1097/564, Руководство пользователя/Instruction, Страница: 38 / 152

DS1097-010 38
Choose one of the Rule Number . It is the number of LCD lines. Maximum 4 lines you can draw.
To enable the detection in Rule Switch .
Choose a Rule Type :
A B : HVR will only detect the action from side A to side B;
B A : HVR will only detect the action from side B to side A;
A 
 
 B : HVR will detect the action from either side B to side A or side A to side B.
Use your mouse to click 2 points in the camera picture to draw a virtual line.
Click
Save to save your settings.
If you want to modify the position or length of the line, click the red box in the line, the color of the line will be
changed to red color. Long press the left button of your mouse to move the line, or drag the terminals to modify
the length or position of the line.
If you want to remove one of the lines from the camera picture, click the red box in the line and then click
Remove button. Click Remove All will delete all lines.
Notice:
o
The lines shall not be too close to the edges of the camera picture, to avoid any failure to trigger an alarm
when the target cross through it.
o
The lines shall not be set too short, to avoid any failure to trigger an alarm when the target passes outside it.
3.5.8.3 SOD (Stationary Object Detection)
Stationary Object Detection function detects the objects left over or lost in the pre-defined region such as the baggage,
purse, dangerous materials, etc., and a series of actions can be taken when the alarm is triggered.
•
Channel : to select the channel you want to configure
•
Switch : to enable or disable the SOD function
•
Buzzer : to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the detection is
triggered
•
Sensitive: The sensitivity level is from 1 to 4, with a default value of 2. Higher sensitivity will be easier to trigger
the detection.
•
Scene: Scene setting includes Indoor and Outdoor. Please choose the scene to match with the place your
camera installed.
•
IVA Lines: Enable or disable the IVA Lines