DS1093-095
48
2.4.6.2
PTZ Set
Click [Main Menu
Device
PTZ] to enter into the below window shown as below.
You could select the channel you desire to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800,
9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity Check (None, Odd, Even, Mark, Space), Address Code and Cruise status
respectively. Please note the PTZ device can be activated only when a channel in connection with the PTZ camera is selected.
2.4.6.3
Serial Set
Enter into the [Main menu
Device
Serial Set] interface shown as below.
When operate DVR via keyboard, it is required to set communication protocol.
•
Baud rate:
set baud rate of serial communication.
•
Data bit:
set data bit of serial communication.
•
Stop bit:
set stop bit.
•
Parity Check:
set parity check to <None> or other.
Note: The Serial item is only available for Ref. 1093/019H.
2.4.7
SYSTEM
2.4.7.1
General
Click [Main Menu
System
General] to enter into the interface shown as below.
You will be allowed to modify system date, time, date/time format, language, video format and auto logout.
And click [DST Setup] button to enter into the below interface shown as below.
