DS1093-095
20
2.4.1.3
Privacy Zone
The function Allow you setup privacy zone parameters according to Picture below. Each channel could set up to four privacy
zones, and please follow below steps to set:
1. Select the area no (Area 1 ~ Area 4);
2. Click [Setup] to adjust position of mask area;
3. After finishing position adjust, click right key of mouse to return back [Privacy zone] interface;
4. Click [Apply] to save the above setting.
2.4.2
RECORD SET
2.4.2.1
Record parameters
Go to [Main menu
Record
Record Para] to enter into the interface shown as below.
•
Channel:
allow you setup the channel you desired.
•
Record:
allows you set up record status (Enable/Disable) of each channel
•
Pack Duration:
indicates maximum continuous record time (15, 30, 45 and 60 min).
•
Pre-record:
Motion detection and I/O triggered record support Pre-record function.
