urmet domus 1067/024, Руководство по установке

Страница: 56 / 120

DS1067-063D
56
LBT20064
5.3.5 Assembling expansion modules in the 1067/024 - 1067/032A control panel
IMPORTANT! The connection and disconnection of the optionals and accessories must always be done while the
control panel is disconnected from all power supplies (both mains and battery).
Figure 22
– Positions available for expansion in the 1067/024 - 1067/032A control panel
Inside the 1067/024 - 1067/032A control panel, 4 1067/008A expansions (positions
A , B , C and D ) or 3 1067/008A
expansions and 1 radio expansion can be assembled.
The position D calls for the assembly of the board in the raised position and turned 90°, inserting the board into slot on
the right and fastening it with 2 self-tapping screws onto the two supports on the left; the programming (PROG) key must
be between the left-hand support if an 1067/008A is installed or on the bottom right of a radio expansion is installed.
The expansions must be fastened with the self-tapping screws supplied.
The positions A and B can be accessed by releasing and turning the mother board ( Figure 18 - Releasing the mother
board). If the 1067/458 GSM module is used, it is not possible to use position B .
Position A is dedicated to the 1067/004 Web server interface, but in its place an 1067/008A board can be installed.
EW
or
1067/008A