URC MRX-10, Руководство по установке

Страница: 9 / 11

71
Wiring to the Relay on the MRX-10
The MRX-10 has a Relay with three contacts, NO, NC, and Com. These can be used as dry contacts or to
send a current to an electrical switch or motor for use with screens, blinds, curtains, etc. The Relay can
be used as either a latching contact or a momentary contact depending on the programming. The
command to actuate the Relay is programmed using the Accelerator software and is sent from the
MRX-10 when triggered by any Total Control system remote.