URC MRX-10, Руководство по установке

Страница: 8 / 11

70
Connecting a POWER sensor to a
third party device.
Connecting a VIDEO sensor to a
third party device.
Hint: If using a video sensor on a
component output, connect the sensor to
the GREEN (Y) output.
Using Power/Video Sensors with the MRX-10
The MRX-10 can use either a Video ( composite ) or Voltage signal to determine the power status of the
equipment it controls. This can then be used to alter the function of a Macro by using IF/ELSE
statements in the programming software. Using a VID-1 Video Sensor cable, the MRX-10 can detect a
video signal from a Composite or Component video output. The VS-100 Voltage Sensor will detect a
Voltage of 3-25V either AC or DC.