URC MRX-10, Руководство по установке

Страница: 4 / 11

66
Off-Site Programming : A constant internet connection is important if, at any future time, programming
changes are needed. Without this connection, a truck roll will be necessary to make these changes.
URC USB Port: USB port for future expansion.
IR Outputs: These fully adjustable routed outputs will only send IR commands to the specific device that each
emitter is attached to. This allows selective control of multiple same-brand, same-model components ( multiple
DVD players, SAT receivers, etc. ). It assures accurate control in that a given component’s commands are routed
only to its dedicated IR output and emitter, preventing IR splash from multiple emitters flashing at the same
time.
Relay NO, NC, COM : Provides configurable switch closure control.
Sensors: Provides connection to up to four URC Voltage Sensors (VS-1006) or URC Video Sensors (VID-6)
for status readings in sensor-based macros.
12V Output: Two programmable 12V/0.2A outputs. Each may be programmed to turn on, off or momentarily
toggle its output.
RS-232 Ports : Four 3.5mm RS232 ports provide direct control. Optional RS-232 adapters are required to use
these ports.
Trigger In: IR and RF trigger input ports allow integration with other control systems and remotes.
RFTX-1: Dedicated port for connection of optional RFTX-1 Transmitter for control of URC Lighting in a 75’-100’
range.