URC MRX-10, Руководство по установке

Страница: 3 / 11

65
Front and Rear Panel Descriptions
Front Panel
The front panel consists of 2 indicator lights illuminate when in use.
Power : Illuminates when the power supply is connected to an outlet.
Ethernet : Illuminates when connected to a Network Router. On=Connected, Off=Not Connected, Blinking =
attempting to connect.
Reset : Press for one second and release button located under the MRX-10 to restart the unit. Pressing and
holding the reset button for 15 seconds will set the unit to factory default.
Rear Panel
The rear panel ports are:
Power : Provides connection to included 12V/1Amp Power Supply.
LAN : Provides connection to LAN ( Local Area network ) via RJ45 cable. This essential connection is responsible
for:
Programming : Not only does the MRX-10 receive its programming over the network, it also issues
programming to connected remotes, keypads and touch panels through this port.
Communication : During normal operation, remote controls (except the TRC-780), keypads and touchpanels
send commands to the MRX-10 through the LAN port. These commands are then relayed to a control port
(
IR, RS-232,relay or trigger ) on the local MRX-10, or to one of the “sub” controllers.