51
Secondary Installation
P
aneL
anD
m
eDia
i
nstaLLation
:
Remove
Figure 77:
Light Deflector Removal
Figure 78: Liner Retainers
Step 1. Remove safety screen, door trim,
and glass door (see “
M
aIntenance
anD
s
erVIce
”
section).
Step 2.
Remove light deflector by removing
the four (4) retaining T-20 screws
(see Figure 77).
Step 3. Remove the side liner retainers one
at a time using a 5/16 socket (see
Figure 78). The screws only have
to be loosened, not completely
removed, as the retainers are slotted.
*Note: The upper rear liner is
supported by the side liners. When
removing the side liners, be sure to
properly support the upper
rear liner so that it does not
fall.
Step 4. Remove the upper and lower
rear liners.
Step 5. Prepare new liners for
installation. Wear clean vinyl
gloves when handling the
liners, the ceramic material
can irritate your skin. Take
care not to damage the liners
as they are very fragile and
can chip easily. If handling
porcelain liners, it is still a
good idea to wear gloves as the oils from your fingers and stain the enameled coating. If the liners
arrive damaged, please contact your Urbana dealer for replacement.
Step 6. Replace liners back into position starting with the lower rear. Please note that any liner options
containing brick will have to be aligned with each other. The rear liner will only line up with the side
liners in one position. Line up the top corners ahead of time to determine the installation direction.
Retighten retainers once liners are in position.
Step 7. Reinstall removed components.
