Uponor SETPOINT 511S, Инструкция по установке и эксплуатации

Страница: 14 / 16

Section 5
Technical Data
SetPoint 511s
Literature
SetPoint 511s and 512 Controllers Installation
and Operation Manual
Control Microprocessor PI control;
This is not a safety (limit) control.
Packaged Weight 0.54 lb. (245 g), Enclosure J, white PVC plastic
Dimensions 2 7 ⁄
8
" H x 2 7 ⁄
8
" W x 13 ⁄
16
" D (73 x 73 x 21mm)
Approvals CSA C US, meets ICES and FCC regulations for
EMI/RFI
Ambient Indoor use only, 32 to 122°F (0 to 50°C),
Conditions < 90% RH non-condensing
Adjustment 34 to 122°F (1 to 50°C)
Range for Slab
or Floor Setting
Power Supply
24VAC ±10% 60 Hz 3 VA
Relay 24VAC, 2 A, Latching
Sensors NTC thermistor, 10k @ 77°F (25°C ±0.2°C) ß=3892
Included Floor Sensor (A3040079)
Optional Outdoor Sensor (A3060070),
Universal Sensor (A3060071) and
Epoxy-coated Slab Sensor (A3060072)
23
Section 5 — Technical Data
SENS Shr
The optional sensor has a short circuit. Locate
and repair the problem as described in the
appropriate sensor instruction sheet. After
correcting the fault, press any button to clear
the error message. (See Figure 49 .)
SENS OPN
The optional sensor has an open circuit. Locate
and repair the problem as described in the
appropriate sensor instruction sheet. After
correcting the fault, press any button to clear
the error message. (See Figure 50 .)
22
Figure 49
Figure 50
Figure 51: SetPoint 511s