46
Manual Giga Connect Box
CONFIGURE YOUR ETHERNET CONNECTION
If your computer has a LAN card that provides an Ethernet connection, you may
have to configure your computer's TCP/IP settings. The following steps will guide you
through setting your computer's TCP/IP settings to work with the Giga Connect Box.
Requirements
Make sure you have the following before attempting to configure your Ethernet
connection:
Computer with Ethernet interface.
Ethernet cable (supplied).
IP address, subnet, gateway, and DNS information for installations not using
DHCP.
How to use this section
The following list shows the procedures for modifying the TCP/IP settings on the
computer. The procedure is slightly different depending on the operating system that
you are using. Please ensure you are using the correct steps for the operating system
on your computer. Follow the links below for instructions to configure your Ethernet
connection on your operating system.
Configure TCP/IP for Windows Vista (page 47)
Configure TCP/IP for Windows 7, 8 oder 10 (page 48)
Configure TCP/IP for macOS (page 49)
7